Diagnosis of lossy resonator filters with source–Load coupling using Y‐parameters

This article presents a novel approach to extract the coupling matrix (CM) of a lossy cross‐coupled resonator bandpass filter with source–load coupling using admittance parameters (also known as Y‐parameters). The Y‐parameters are calculated by characteristic polynomials corresponding to the measured S‐parameters. The unloaded quality factor of resonators and the CM can be extracted from the Y‐parameters. The method allows one to diagnose a filter with source–load coupling without necessity of dealing with the degenerate poles problem of the Y‐parameters and the measurement noise. The proposed diagnosis method can be used in a filter tuning and speeds up its physical realization. The method is verified by a fabricated fourth‐order bandpass filter and a simulated substrate integrated waveguide dual‐mode filter with source–load couplings. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:713–717, 2014.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Controlled destruction of residual crosslinker in a silicone elastomer for drug delivery

In drug delivery systems that use silicone elastomers as a diffusion matrix for the active drug, it is common to crosslink the material by the hydrosilylation reaction. In this platinum‐catalyzed reaction, vinyl groups on a polymer add to the methyl siloxane hydride (MHS) groups on a low molecular mass crosslinker. With an excess of crosslinker, a fast curing is achieved and a fully crosslinked material is formed. Unreacted MHS groups were shown to remain in the elastomer after curing because of the excess crosslinker. In this work, a simple procedure was developed to eliminate the unreacted MHS groups from the final product. We found that storage of the product at +40°C and 75% relative humidity for a few weeks will effectively destroy the residual MHS groups in the elastomer. The effects of varying levels of humidity, oxygen, and temperature on this postcuring procedure were studied. The amount of MHS groups was measured with NMR and IR spectroscopy. We also found that the hardness of the material increased by approximately 25% as a consequence of this postcuring treatment. This increase is probably due to a secondary crosslinking reaction between MHS and silanol groups. Heat treatment at higher temperatures led to an even further increase in the hardness and compression modulus. Because no MHS groups remained in the elastomer when this heat treatment was started, it is apparent that another secondary crosslinking reaction is occurring, probably silanol condensation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2254–2264, 2002     

Persistent problems and practices in information systems development: a study of mobile applications development and distribution

The widespread uptake of mobile technologies has witnessed a re‐structuring of the mobile market with major shifts in the predominance of particular firms and the emergence of new business models. These sociotechnical trends are significant in the ways that they are influencing and shaping the working lives of software professionals. Building on prior research investigating the persistent problems and practices of systems development, this paper examines mobile applications development and distribution. A qualitative study of 60 developers based in Sweden, the UK and the USA was analysed around the interrelated problems of diversity, knowledge and structure. The analysis revealed how platform‐based development in an evolving mobile market represents significant changes at the business environment level. These changes ripple through and accentuate ongoing trends and developments, intensifying the persistent problems and challenges facing software developers.     

磷酸盐玻璃载银抗菌PP复合材料的性能研究

对以磷酸盐玻璃载银抗菌剂制备的聚丙烯复合材料进行了性能研究。实验结果表明,当抗菌剂粉体的添加量为PP的2‰时,抗菌率就能达到99%以上,制备出的抗菌PP塑料具有优异、长效的抗菌性能。添加抗菌母粒制备抗菌塑料的方法能够使抗菌剂集中并均匀的分散在基体树脂的表面,并对基体树脂的力学性能不会产生明显的影响。     

Preparation and properties of multiwalled carbon nanotube/polycaprolactone nanocomposites

Multiwalled carbon nanotube/polycaprolactone nanocomposites (MWNT/PCL) were prepared by in situ polymerization, whereby as‐received MWNTs (P‐MWNTs) and purified MWNTs (A‐MWNTs) were used as reinforcing materials. The A‐MWNTs were purified by nitric acid treatment, which introduced the carboxyl groups (COOH) on the MWNT. The micrographs of the fractured surfaces of the nanocomposites showed that the A‐MWNTs in A‐MWNT/PCL were better dispersed than P‐MWNTs in PCL matrix (P‐MWNT/PCL). Percolation thresholds of the P‐MWNT/PCL and A‐MWNT/PCL, which were studied by rheological properties, were found at ～2 wt % of the MWNT. The conductivity of the P‐MWNT/PCL was between 10^?1 and 10^?2 S/cm by loading of 2 wt % of MWNT although that of the A‐MWNT/PCL reached ～10^?2 S/cm by loading of 7 wt % of MWNT. The conductivity of the P‐MWNT/PCL was higher than that of the A‐MWNT/PCL at the entire range of the studied MWNT loading, which might be due to the destruction of π‐network of the MWNT by acid treatment, although the A‐MWNT/PCL was better dispersed than the P‐MWNT/PCL. The amount of the MWNT at which the conductivity of the nanocomposite started to increase was strongly correlated with the percolation threshold. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1957–1963, 2007     

Aspectualization of code clones—an algorithmic approach

System Modularity has positive effects on software maintainability, reusability, and understandability. One factor that can affect system modularity is code tangling due to code clones. Code tangling can have serious cross-cutting effects on the source code and thereby affect maintainability and reusability of the code. In this research we have developed an algorithmic approach to convert code clones to aspects in order to improve modularity and aid maintainability. Firstly, we use an existing code-clone detection tool to identify code clones in a source code. Secondly, we design algorithms to convert the code clones into aspects and do aspect composition with the original source code. Thirdly, we implement a prototype based on the algorithms. Fourthly, we carry out a performance analysis on the aspects composed source code and our analysis shows that the aspect composed code performs as well as the original code and even better in terms of execution times.     

12 MW热电联产装置运行总结

总结了12MW热电联产装置的特点及运行情况。实际运行情况证明,建设热电联产装置是以煤为原料的中、小氮肥企业彻底解决造气炉渣及细灰综合利用,使其变废为宝的一条重要途径,也是氮肥企业降低生产成本、增加效益、提高企业市场竞争力的必然选择。     

Synthesis,characterization, and application of PVP/chitosan blended polymers

The purpose of this study was to research the compatibility and application of polyvinylpyrrolidone (PVP)/chitosan blended polymers. The polymers were synthesized at different weight ratios and tested using techniques such as Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis to evaluate the compatibility of the blended materials. Incompatibility occurred when the quantity of chitosan exceeded 75%. The addition of PVP was beneficial for the thermal stability of chitosan, but resulted in inferior strength performance. Furthermore, the blended polymers did not show a color‐enhancement effect, but did show elevated water absorption, chlorine resistance, and colorfastness. In addition, the treated fabrics with a higher chitosan ratio in the blended polymer had antimicrobial properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 885–891, 2006     

Thermooxidative degradation of natural rubber/clay composite

The clay is treated with a reducing agent and an acid so as to obtain a clay containing various metal components with a variable‐valence state. Then, the clay is coprecipitated with natural rubber (NR) latex to prepare a vulcanized NR/clay composite. The degradation process of the NR/clay composite under hot air condition was studied dynamically by using a Fourier transform infrared spectrometer attaching an in situ sample cell and was also investigated using the TGA method. The test result obtained from the infrared spectrometry indicated that under low decomposition temperature, the decomposition products of the test samples mainly are ethylene, low molecular olefinic hydrocarbon, and carbonyl compounds. As the decomposition temperature rises, the low molecular olefinic hydrocarbon content decreases, the olefine with longer chain is formed, and a lot of alkane decomposition products are formed at the same time. When the content of the metal components with a variable‐valence state in clay such as Cu, Mn, Co, and Fe increases, the oxidation products containing the carbonyl group, the olefinic hydrocarbon, and CO₂ in the decomposition product of the test sample also increase. The TGA result clearly shows a shoulder peak that appears by the side of the main peak on the DTG curve of NR/clay composite. With the increase in the content of metal components with variable‐valence state in clay, the initial degradation temperature of the test sample (T₀), the degradation peak temperature (T_p1), and the final degradation temperature (T_f1) in first‐stage reaction, as well as the degradation peak temperature (T_p2) and the last final degradation temperature (T_f) in second‐stage reaction of all the test samples more or less shift to the direction of low temperature; besides, the activation energy (E) of the reaction of the test samples more or less decreases. This means that the metal components with variable‐valence state promote the oxidative degradation of the clay–rubber masterbatch. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3809–3815, 2006